The materials for Self-tapping threaded insert |
-
AD-INSERT self-tapping threaded insert
- Introduction and application for self-tapping threaded inser
- The advantages of Self-tapping threaded insert
- The materials for Self-tapping threaded insert
-
specification table for self-tapping threaded insert
- Threadedinsertself-tappingwithcutting slot/imperial thread
- Threaded insert self-tappingwith cutting Slot/Metric thread
- Threaded insert self-tapping with cutting slot and head
- Threaded insert self-tapping withthree bores
- Threaded insertself-tapping/threeroundholeswithsafetypin
- Thin-walled threaded insert self-tapping with cutting slot
- Thin walled threaded insert self-tapping with3cutting bore
- Threaded insert self-tapping withhexagonalsocket/cuttingslot
- Threaded insert self-tapping with three bores/chip reservoir
- Threaded insert self-tappingwith three bores and head
- Installation recommendation（Reference）
- Installation method and attention for self-tapping threaded
- AD-INSERT keylocking threaded insert
AD - Insert ? self-drilling screw of the material:
Self-drilling screw of the commonly used material for: carbon steel (1215 or S45c) and stainless steel (SUS303 SUS304 or passivation) two kinds, according to the need to have other: brass (C3604) and high temperature alloys, anti-corrosive materials.
Pieces of carbon steel material surface hardening and general environmental protection coating processing, are suitable for aluminum, magnesium alloy, copper alloy, plastic, wood and other engineering strength lower substrate.
Pieces of stainless steel material is often used in high strength such as cast iron products.
大連安迪機械設備有限公司
緊固件部
電話:0411-86858458 Tel:+86-411-86858458
傳真:0411-86859989 Fax:+86-411-86859989
網址：http://www.kathrynskloset.com E-Mail:dlandi@dlandi.com
地址：遼寧省大連市甘井子區虹彩西園103號
機械部
電話:0411-86408898 Tel:+86-411-86408898
傳真:0411-86858239 Fax:+86-411-86858239
技術支持：愛得科技遼ICP備12016963號-1