相關配套工具 |
-
AD-INSERT self-tapping threaded insert
- Introduction and application for self-tapping threaded inser
- The advantages of Self-tapping threaded insert
- The materials for Self-tapping threaded insert
-
specification table for self-tapping threaded insert
- Threadedinsertself-tappingwithcutting slot/imperial thread
- Threaded insert self-tappingwith cutting Slot/Metric thread
- Threaded insert self-tapping with cutting slot and head
- Threaded insert self-tapping withthree bores
- Threaded insertself-tapping/threeroundholeswithsafetypin
- Thin-walled threaded insert self-tapping with cutting slot
- Thin walled threaded insert self-tapping with3cutting bore
- Threaded insert self-tapping withhexagonalsocket/cuttingslot
- Threaded insert self-tapping with three bores/chip reservoir
- Threaded insert self-tappingwith three bores and head
- Installation recommendation（Reference）
- Installation method and attention for self-tapping threaded
- AD-INSERT keylocking threaded insert
the locking thread insert material:1cr18ni9(1Cr18Ni9Ti)
The special tap  Material: the high-speed steel (6542 9341).It is used to work the thread insert’ s bottom hole which is used mechanically and manually .it is divided into three categories .the seraigh channel ,the spiral scroll and the squeezing tap.
The manual wrench Material:≤M8LY12 ≥M10 45#steel It is used for the installment of the thread insert .  It is the basic principle that the threadinsert is guided firstly to force the outside diameter shrinkage to pack it into the bottom hole smoothly.The efficiently is enhanced and the scrap rate is reduced through using the wrench.
The electric wrench The using range :M3~M12 It is used in the assemblage of the multitudinous thread insert or used in the
assembling the production.
The tail of break-off tool 
Material:40cr it off with a 200g hammerpunching to form it into the throng hole.It is used in breaking off the thread insert tail of the through hole, the break-off tool is aligned to the tail and breaks
Extractor Material:the high-speed steel  Enable users to extract a thread insert fitted with defect. Thanks to it is triangular shape. the extractor can be locked into the thread insert, by rotating the tool while keeping a vertical thrust, the thread insert can be unscrewed.
Plug GaugeMaterial:Cr Mn 
It enables users to check the conformity of the tapping before insertion of thread inserts for the work piece for having high accuracy.
The self-locking nut  Material:35# steelIt makes the nut impossible to unscrew when the machine is vibrating, after the locking thread insert is stetted into the nut. It is capable of removing and using time after time
Maintenance toolkit screw holes
Repair tool kit Range:M3-M64
|
大連安迪機械設備有限公司
緊固件部
電話:0411-86858458 Tel:+86-411-86858458
傳真:0411-86859989 Fax:+86-411-86859989
網址：http://www.kathrynskloset.com E-Mail:dlandi@dlandi.com
地址：遼寧省大連市甘井子區虹彩西園103號
機械部
電話:0411-86408898 Tel:+86-411-86408898
傳真:0411-86858239 Fax:+86-411-86858239
技術支持：愛得科技遼ICP備12016963號-1